|
|
||||
Cessna 310-R PowerPac Spoiler Kit
|
PowerPac
airplane spoilers "Jet Type" design is similar to
those used on commercial jet airliners. The system consists of single
flat plates, 17.50" X 10.50" one on top of each wing that lies flat when not in use.
When deployed, they extend upward into the slipstream at a 60-degree angle, thereby "spoiling" a portion of the lift being generated by the wing, while at the same time creating drag. PowerPac Spoilers are designed to work in conjunction with standard Cessna 310R aircraft parts. Article from Twin Cessna Flyer magazine, discussing the benefits of spoilers. |
STC: SA00215SE 7-7-95 SP13000 Cessna 310R/T310R (Must be installed
only in conjunction with vortex generators manufactured by Micro AeroDynamics STC #SA4980NM or STC #SA5668NM; or by Aeronautical Testing
Service, STC #5163NM). Uses independent, dedicated hydraulic power pack.
Cessna 310R Installation Time: 40-45 Labor hours
Cessna:
- Cessna 310R 310R/T310R w/VG’s currently installed:
Net $12,000 (special order, not in stock)
Contact Us for More Info about Cessna 310R PowerPac Spoiler Kit
CHOOSE YOUR AIRCRAFT |
|
|
|
|
![]() Spoilers Inc. Jeff Shapiro, 253-851-1769
Copyright 2020 Spoilers Inc.
|